FastIron SX シリーズ

Brocade FastIron SXシリーズスイッチは、業界屈指の価格と性能でキャンパス・ネットワークのアグリゲーション/コア・ソリューションを提供し、1ギガビットと10ギガビット・イーサネット(GbE)のエンタープライズ展開において、拡張性が高く、高セキュリティかつ低レイテンシで、耐障害性の高いIPサービス・インフラをもたらします。高性能なノン・ブロッキング・アーキテクチャをもつほか、エンド・トゥ・エンドの高可用性設計を採用し、冗長対応のマネジメント・モジュールとファン、負荷分散型のスイッチ・ファブリックと電源装置を装備しています。

ハイライト

  • 業界をリードする価格性能比をキャンパス・アグリゲーションとコア・スイッチングにおいて実現。1 GbEや10 GbEの導入のための拡張性、安全性、低遅延、および耐障害性に優れたインフラの構築を支援
  • 1シャーシあたり最大128個の10 GbEポートと384個の1 GbEポートを収容する高性能アーキテクチャ。IPv4/IPv6対応のレイヤ2/3スイッチングおよびルーティングをサポート
  • マルチシャーシ・トランキング、ホットプラグ対応冗長管理モジュール(ヒットレス・フェイルオーバ)、スイッチ・ファブリック、電源、ファン、ステートフルOSPF冗長、グレースフルBGP/OSFPリスタート、ヒットレスIn-Service Software Upgrade(ISSU)の高可用性設計
  • 性能を損なうことなく、すべてのポートで拡張可能なハードウェア・ベースのトラフィック監視をサポートする内蔵sFlow

FastIron SX シリーズシャーシとベースシステム

Part Number Description MSRP
FI-SX1-AC See Note 1 FastIron SuperX Chassis with Fan tray and one (1) AC Power Supply. Equivalent to FI-SX1-4-AC. Call
FI-SX1-DC See Note 1 FastIron SuperX Chassis with Fan tray and one (1) DC Power Supply. Equivalent to FI-SX1-4-DC. Call
FI-SX800-AC See Note 1 FastIron SX 800 chassis bundle includes one SX 800 8-slot chassis (FI-SX800-S), two Switch Fabric module (SX-FISF), one system power supply (SX-ACPWR-SYS), nine interface panels (SX-FI-IFPNL), three power supply panels (SX-PWR-PNL), and one fan tray (SX-SX800-FAN). This chassis may be configured with IPv4 or IPv6-ready management and line modules. Call
FI-SX1600-AC See Note 1 FastIron SX 1600 chassis bundle includes one SX 1600 16-slot chassis (FI-SX1600-S), two Switch Fabric Module (SX-FISF), two system power supply (SX-ACPWR-SYS), seventeen interface cover panels (SX-FI-IFPNL), six power supply cover panels (SX-PWR-PNL), one SX 1600 filter (SX-SX1600-FILTER), and two fan trays that includes fans (SX-SX1600-FAN). Call
FI-SX800-DC See Note 1 FastIron SX 800 chassis bundle includes one SX 800 8-slot chassis (FI-SX800-S), two Switch Fabric module (SX-FISF), one system power supply (SX-DCPWR-SYS), nine interface panels (SX-FI-IFPNL), three power supply panels (SX-PWR-PNL), and one fan tray (SX-SX800-FAN). Call
FI-SX800-1SF-AC See Note 1 FastIron SX 800 chassis bundle, which includes 1 AC power supply and 1 switch fabric. Call
FI-SX1600-DC See Note 1 FastIron SX 1600 chassis bundle includes one SX 1600 16-slot chassis (FI-SX1600-S), two Switch Fabric Module (SX-FISF), two system power supply (SX-DCPWR-SYS), seventeen interface cover panels (SX-FI-IFPNL), six power supply cover panels (SX-PWR-PNL), one SX 1600 filter (SX-SX1600-FILTER), and two fan trays that includes fans (SX-SX1600-FAN). Call
FI-SX1600-1SF-AC See Note 1 FastIron SX 1600 chassis bundle, which includes 2 AC system power supply and 1 switch fabric. Call

FastIron SX シリーズマネジメント・モジュール(IPv4) とレイヤ3PREM対応

Part Number Description MSRP
SX-FI12GM-4 See Note 3 FastIron SuperX Management module features 12 combo copper / fiber Gigabit Ethernet ports (10/100/1000 Mbps (RJ45) or Gigabit Ethernet Fiber (SFP) connectivity per port), 400 MHz processor and 256 MB SDRAM. Software includes advanced Layer 2 and Base Layer 3 IPv4 services (static routes and RIP advertisement). This management module may only be used in systems configured with all IPv4 line modules. Call
SX-FI12GM-4-PREM See Note 3 FastIron SuperX Management module features 12 combo copper / fiber Gigabit Ethernet ports (10/100/1000 Mbps (RJ45) or Gigabit Ethernet Fiber (SFP) connectivity per port), 400 MHz processor and 256 MB SDRAM. Software includes advanced Layer 2 and full Layer 3 IPv4 services (BGP-4, OSPF, RIP, VRRP, VRRPE, DVMRP, PIM-SM and PIM-DM). This management module may only be used in systems configured with all IPv4 line modules. Call
SX-FIZMR See Note 3 Management module for the FastIron SX 800 and SX 1600 chassis. This management module includes one Ethernet management port and one serial console port. There are no user traffic ports supported on this module. To configure 1:1 management module redundancy, two of the same type of management modules must be installed in the chassis. The loaded software image supports advanced Layer 2 and Base Layer 3 IPv4 services (static routes and RIP advertisement). This management module may be used in systems configured with all IPv4 line modules or all IPv6-ready line modules. Call
SX-FIZMR-PREM See Note 3 Management Module for the FastIron SX 800 and SX 1600 chassis. This management module includes one Ethernet management port and one serial console port. There are no user traffic ports supported on this module. To configure 1:1 management module redundancy, two of the same type of management modules must be installed in the chassis. The loaded software image supports advanced Layer2, Base Layer3 Services (static routes and RIP advertisement) or Full Layer3 IPv4 Services (BGP-4, OSPF, RIP, VRRP, VRRPE, DVMRP, PIM-SM and PIM-DM). This management module may only be used in systems configured with all IPv4 line modules. Call
SX-FI2XGMR4 Management module for the FastIron SX 800 and SX 1600 chassis. This management module includes one Ethernet management port, one serial console port and two 10-Gigabit Ethernet ports for user traffic. The 10-GE ports support pluggable XFP transceivers. These transceivers must be purchased separately. To configure 1:1 management module redundancy, two of the same type of management modules must be installed in the chassis. The loaded software image supports advanced Layer 2 and Base Layer 3 IPv4 services (static routes and RIP advertisement). This management module may only be used in systems configured with all IPv4 line modules. Call
SX-FI8GMR4 See Note 3 8-port GbE IPv4 Management Module for the FastIron SX 800 and SX 1600 chassis. This IPv4 management module includes one Ethernet management port, one serial console port, 4-port GbE copper and 4-port GbE SFP (transceiver not included) for user traffic. Module ships with IronWare Advanced Layer2 and Base Layer3 software. This module may only be used in a system configured with IPv4 management and line modules. Call
SX-FI8GMR4-PREM See Note 3 8-port GbE IPv4 Management Module for the FastIron SX 800 and SX 1600 chassis. This IPv4 management module includes one Ethernet management port, one serial console port, 4-port GbE copper and 4-port GbE SFP (transceiver not included) for user traffic. Module ships with Premium IronWare Full L3 IPv4 service set. This module may only be used in a system configured with IPv4 management and line modules. Call

FastIron SX シリーズマネジメント・モジュール(IPv6導入可能)とレイヤ3PREM対応

Part Number Description MSRP
SX-FI12GM-6 See Note 4 FastIron SuperX Management module features 12 combo 10/100/1000 Mbps (RJ45) / SFP Gigabit Ethernet ports, 400 MHz processor and 256 MB SDRAM. Software includes advanced Layer 2 and Base Layer 3 IPv4 services (static routes and RIP advertisement). This module may be upgraded with Full L3 Ironware Software (IPv4 or IPv4/IPv6). This management module may only be used in systems configured with all IPv6-ready line modules. Call
SX-FI12GM-6-PREM See Note 4 IPv6-Capable FastIron SuperX Management Module includes 12 combo 10/100/1000 Mbps (RJ45) / SFP Gigabit Ethernet ports (transceivers not included), 400 MHz processor and 256 MB SDRAM. Software includes advanced Layer 2 and Full Layer 3 IPv4 services (BGP-4, OSPF, RIP, VRRP, VRRPE, DVMRP, PIM). This module may be upgraded with Full L3 IPv4 & IPv6 Ironware Software. This management module may only be used in systems configured with all IPv6-ready line modules. Call
SX-FI8GMR6 See Note 4 8-port GbE Management module with Base L3 IPv4 for the FastIron SX 800 and SX 1600 chassis. This management module includes one Ethernet management port, one serial console port, 4-port GbE copper and 4-port GbE SFP for user traffic. The GbE ports support pluggable SFP transceivers. These transceivers must be purchased separately. To configure 1:1 management module redundancy, two of the same type of management modules must be installed in the chassis. The loaded software image supports advanced Layer 2 and Base Layer 3 IPv4 services (static routes and RIP advertisement). This module may be upgraded with Full L3 Ironware Software (IPv4 or IPv4/IPv6). This management module may only be used in systems configured with all IPv6-ready line modules. Call
SX-FI8GMR6-PREM See Note 4 IPv6-Capable 8-port GbE Management module for the FastIron SX 800 and SX 1600 chassis. This management module includes one Ethernet management port, one serial console port, 4port GbE copper and 4-port GbE SFP for user traffic. The GbE ports support pluggable SFP transceivers. These transceivers must be purchased separately. To configure 1:1 management module redundancy, two of the same type of management modules must be installed in the chassis. The loaded software image supports advanced Layer 2 and Full Layer 3 IPv4 services (BGP-4, OSPF, RIP, VRRP, VRRPE, DVMRP, PIM). This module may be upgraded with Full L3 IPv4 & IPv6 Ironware Software. This management module may only be used in systems configured with all IPv6-ready line modules. Call
SX-FI2XGMR6-PREM IPv6-Capable 2-port 10GbE Management module for the FastIron SX 800 and SX 1600 chassis. This management module includes one Ethernet management port, one serial console port and two 10-Gigabit Ethernet XFP ports (10GbE) for user traffic. These transceivers must be purchased separately. To configure 1:1 management module redundancy, two of the same type of management modules must be installed in the chassis. The loaded software image supports advanced Layer 2 and Full Layer 3 IPv4 services (BGP-4, OSPF, RIP, VRRP, VRRPE, DVMRP, PIM-SM and PIM-DM). This module may be upgraded with Full L3 IPv4 & IPv6 Ironware Software. This management module may only be used in systems configured with all IPv6-ready line modules. Call
SX-FI12GM-6-PREM6 IPv6-Capable FastIron SuperX Management Module includes 12 combo 10/100/1000 Mbps (RJ45) / SFP Gigabit Ethernet ports (transceivers not included), 400 MHz processor and 256 MB SDRAM. Module ships with Premium IronWare software including Full L3 IPv4+IPv6 service sets (BGP-4, OSPF/OSPFv3, RIP/RIPng, VRRP/VRRPE, DVMRP, PIM, IPv4/IPv6 static routes, 6-to-4 static tunneling). The module can only be used in a system configured with all IPv6-ready modules. Call
SX-FIZMR-6-PREM6 IPv6-Capable Zero-Port Management Module for the FastIron SX 800 and SX 1600 chassis. This management module includes 1 Ethernet management port and 1 serial console port. There are no user traffic ports supported on this module. To configure redundancy, two of the same type of management modules must be installed in the chassis. Module ships with Premium IronWare software including Full L3 IPv4+IPv6 service sets (BGP-4, OSPF/OSPFv3, RIP/RIPng, VRRP/VRRPE, DVMRP, PIM, IPv4/IPv6 static routes, 6-to-4 static tunneling). The module can only be used in systems configured with all IPv6-ready line modules. Call
SX-FI8GMR6-PREM6 IPv6-Capable 8 port GbE Management Module for the FastIron SX 800 and SX 1600 chassis. This management module includes one Ethernet management port, one serial console port, 4port GbE copper and 4-port GbE SFP (transceiver not included) for user traffic. Module ships with Premium IronWare software including Full L3 IPv4+IPv6 service sets. The module can only be used in a system configured with all IPv6-ready line modules. Call
SX-FI2XGMR6-PREM6 IPv6-Capable 2-port 10GbE Management Module for the FastIron SX 800 and SX 1600 chassis. This management module includes 1 Ethernet management port, one serial console port and 2 10GbE ports for user traffic. The 10GbE ports support pluggable XFP transceivers (transceivers not included). Module ships with Premium IronWare software including Full L3 IPv4+IPv6 service sets (BGP-4, OSPF/OSPFv3, RIP/RIPng, VRRP/VRRPE, DVMRP, PIM, IPv4/IPv6 static routes, 6-to-4 static tunneling). The module can only be used in a system configured with all IPv6-ready line modules. Call
SX-FIZMR-6-PREM IPv6-Capable Zero-Port Management Module for the FastIron SX 800 and SX 1600 chassis. This management module includes 1 Ethernet management port and 1 serial console port. There are no user traffic ports supported on this module. To configure redundancy, two of the same type of management modules must be installed in the chassis. Module ships with Premium IronWare software including Full L3 IPv4 service set (BGP-4, OSPF, RIP, VRRP, VRRPE, DVMRP, PIM) and can be upgraded with Full L3 IPv4 & IPv6 Ironware Software. The module can only be used in systems configured with all IPv6-ready line modules. Call

FastIron SX シリーズモジュール(IPv4) とPOE対応モジュール

Part Number Description MSRP
SX-FI424100FX 24-port 100FX bundle, which includes SX-FI424HF and 24 E1MG-100FX optics for fiber to the desktop applications. Call
SX-FI42XG-BNDL-2CX4 2-port CX4 FastIron SuperX module bundle. Includes one SX-FI2XG and two 10G-XFP-CX4. Call
SX-FI424C 24-port 10/100/1000 Mbps (RJ-45) Ethernet module for FastIron SuperX family Call
SX-FI424P 24-port 10/100/1000 Mbps (RJ-45) Ethernet with POE installed module for FastIron SuperX family Call
SX-FI424F 24-port SFP-based Gigabit Fiber Ethernet module for FastIron SuperX family Call
SX-FI424HF 24-port 100/1000 Mbps SFP-based Fiber Ethernet module for FastIron SuperX family Call
SX-FI42XG 2-port XFP 10 Gigabit Ethernet module for FastIron SuperX family Call
SX-24GCPOE POE Add-in Card for 24-port 10/100/1000 Mbps (RJ-45) modules (Sales Model # SX-FI424C or SX-FI624C) Call

FastIron SX シリーズモジュール(IPv6導入可能)とPOE対応モジュール

Part Number Description MSRP
SX-FI624C 24-port 10/100/1000 Gigabit Ethernet module for FastIron SuperX family. Call
SX-FI624P 24-port 10/100/1000 Gigabit Ethernet with POE installed IPv6 module for FastIron SuperX family. Call
SX-FI624HF 24-port 100/1000 SFP based Fiber Ethernet IPv6 module for FastIron SuperX family. Call
SX-FI62XG 2-port XFP 10 Gigabit Ethernet module for FastIron SuperX family. Call
SX-FI624100FX 24-port 100FX bundle, which includes SX-FI624HF and 24 E1MG-100FX optics for fiber to the desktop applications. Call
SX-24GCPOE POE Add-in Card for 24-port 10/100/1000 modules (Sales Model # SX-FI424C or SX-FI624C) Call

FastIron SX シリーズ電源

Part Number Description MSRP
SX-ACPWR-SYS 90-240 VAC power supply for the FastIron SuperX family Call
SX-DCPWR-SYS DC Power Supply for the FastIron SuperX family Call
SX-ACPWR-POE 90-240 VAC power supply for the FastIron SuperX family Call
SX-DCPWR-POE DC POE power supply for the FastIron SuperX family Call
SX-ACPWR2500-POE FSX 2500W 220V POE PS for the FastIron SuperX family Call
SX-PCAUS Australian Power Cord for the FastIron SuperX family Call
00700-551 Right Angle Power Cord, 10A 125V, NEMA 5-15P (plug) to IEC 60320-C13 Connector. Call

FastIron SX シリーズアクセソリーと他の商品

Part Number Description MSRP
SX-FIL3U Full Layer 3 IPv4 Upgrade Kit for the FastIron SuperX/SX family. Software includes advanced Layer 2 and full Layer 3 IPv4 services (BGP-4, OSPF, RIP, VRRP, VRRPE, DVMRP, PIM-SM and PIM-DM). Call
SX-FIL3U-6-IPV4 Full Layer 3 IPv4 Upgrade Kit for the IPv6-ready management modules for the FastIron SuperX/SX family. Software includes advanced Layer 2 and Full Layer 3 IPv4 services (BGP-4, OSPF, RIP, VRRP, VRRPE, DVMRP, PIM-SM and PIM-DM). Note: This upgrade kit may only be applied to IPv6-ready management modules and does not enable IPv6 routing. Call
SX-FIL3U-6-IPV6 Full Layer 3 IPv4+IPv6 upgrade kit for the IPv6-ready management modules for the FastIron SuperX/SX family. This software upgrade adds support for Full Layer 3 IPv6 routing protocols including RIPng, OSPFv3, IPv6 static routes, 6-to-4 static tunneling. This upgrade also includes Full L3 IPv4 services including RIPv1/v2, OSPF, BGP4, PIM-SM, PIM-DM, and DVMRP. Note: This upgrade kit may only be applied to IPv6-ready management modules. Call